Monel 400-ANPING JOINWE WIRE MESH CO., LTD

PRODUCTION DESCRIPTION

Monel 400 is a nickel-copper alloy (about 67% Ni – 23% Cu) that is resistant to sea water and steam at high temperatures as well as to salt and caustic solutions.

Monel 400

CLASSIFICATION:

Alloy wire,Coated wire,High carbon iron wire,Low carbon steel wire

Chinese Standard Grade:

Monel 400

Monel 400 (Monel 400, N04400) is a nickel-copper alloy with first-class corrosion resistance to a variety of reducing media, and also has certain mechanical properties. Monel400 has particularly excellent corrosion resistance against air-free hydrofluoric acid, neutral and alkaline salt solutions.

Monel 400 is used for uranium refining and isotope separation in nuclear fuel production. It is a standard material for the concentration and crystallization of salt solutions, vinyl chloride monomer (VCM) production, MDI and TDI production, and petroleum refining. Monel 400 is also used to manufacture feedwater heaters and steam generator heat transfer tubes, sheathed pipes and platform steel columns used in offshore oil and gas production. Monel 400 alloy is certified for use in pressure vessels with operating temperatures between -10 and 425°C (18 and 797°F). Monel400 alloy has good corrosion resistance against stress corrosion caused by aluminum elements. Monel400 maintains excellent strength at low temperatures. Monel400 (N04400) is easier to process than other high alloy materials.

Application:

Marine engineering , Chemical and hydrocarbon processing equipment , Gasoline and freshwater tanks , Crude petroleum stills , De-aerating heaters , Boiler feed water heaters and other heat exchangers , Valves, pumps, shafts, fittings, and fasteners , Industrial heat exchangers , Chlorinated solvents , Crude oil distillation towers

WIRE DIAMETER:

Excellent corrosion resistance in a wide range of acidic & alkaline environments , Especially suitable for reducing conditions , Good ductility & thermal conductivity , Good for sea water applications

Chemical Composition

Element	Cu	Fe	C	Si	Co	Mn	Ni+Co	S
Min %	28.00	-	-	-	-	-	63.00	-
Max %	34.00	2.50	0.30	0.50	2.0	2.00	70.00	0.024

Physical properties

Density	8.8 g/cm³	0.318 lb/in³
Melting Point	1350 °C	2460 °F
Coefficient of Expansion	13.9 μm/m °C (20 – 100 °C)	7.7 x 10-6 in/in °F (70 – 212 °F)
Modulus of Rigidity	65.3 kN/mm²	9471 ksi
Modulus of Elasticity	173 kN/mm²	25092 ksi